Banner for LabNotes
From Lab Notes
Contact Information
Forest Products Laboratory
One Gifford Pinchot Drive
Madison, WI 53726-2398
Phone: (608) 231-9200
Fax: (608) 231-9592
Email

 

You are here: FPL Home  / Information Products & Services  / Publications

Requested Product

Title: Modern Instrumental Methods to Investigate the Mechanism of Biological Decay in Wood Plastic Composites

Source: IRG/WP 14-40674, The international Research Group on Wood Protection, section 4, Processes and properties, Paper prepared for the 45th IRG Annual Meeting, St George, Utah, USA, 11-15 May 2014; pp. 2-20;.

Author(s)Sun, Grace; Ibach, Rebecca; Gnatowski, Marek; Glaeser, Jessie; Leung, Mathew; Haight, John

Publication Year: 2014  View PDF »

Category: Conference Proceedings
Associated Research Project(s):   FPL-4707-1B  FPL-4715-2

Abstract: Various instrumental techniques were used to study the fungal decay process in wood plastic composite (WPC) boards. Commercial boards exposed near Hilo, Hawaii (HI) for eight years in both sun and shadow locations were inspected and tested periodically. After eight years of exposure, both boards were evaluated using magnetic resonance imaging (MRI), while a selected area of the board exposed in shadow was additionally tested using microscopy and micro x-ray computed tomography (CT). Experimental boards exposed to either exterior conditions in Vancouver, British Columbia (BC) or a laboratory decay process were used for verification of MRI and CT results obtained from the commercial board. MRI detected the presence of free water and its distribution in the exposed commercial board samples tested. Fibre saturation in the experimental board was found to be about 22%, in comparison to 27 – 30% present in most wood species. There was good correlation between the detection of free water by MRI and by destructive testing. Reconstructed volumes from CT scans of the tested boards allowed for the WPC microstructure to be observed in various planes of view and for void analysis of the material to be conducted. A significantly higher average percentage volume of voids was detected in the exposed sample compared to its reference unexposed counterpart. CT scans and subsequent void analysis of the experimental soil block culture test samples of known weight loss in wood demonstrated this technique to be reasonably accurate in the detection of voids created due to biological decay. No obvious relationship was established between the presence of free water detected by MRI and the average volume of voids detected by CT. Scanning electron microscopy (SEM) confirmed the presence of fungal mycelia in the exposed commercial board cross-section imaged by both MRI and CT. It was confirmed that both MRI and micro CT could be used for non-destructive evaluations of WPC materials, including their decay process. This work also found that many different decay fungi species could colonize and internally damage WPC, and that fungal decay in WPC seems to be a self-propagating process requiring an initiation time period where no obvious decay damage is observed.

Keywords: computed tomography; exterior exposure; magnetic resonance imaging; microstructure; mositure content; scanning electron microscopy; soil block culture test; water absorption; wood pllastic composite; viod analysis

Publication Review Process: Informally Refereed (Peer-Reviewed)

File size: 1,561 kb(s)

Date posted: 07/30/2014

This publication is also viewable on Treesearch:  view
RITS Product ID: 68065
Current FPL Scientist associated with this product
Ibach, Rebecca E.
Research Chemist
  

Additional items that might interest you
View the video celebrating FPL's 100 years of public service in 2010, from the producers of the Greatest Good....view

Research Highlights from FPL....view

Termite Eradication: A search for the Holy Grail.... view

Moisture Management in Residential Construction Series videos...view

Wood Floor Systems in Residential Construction Series videos....view
- FPL's Mission and Strategic Plan -

FPL's mission is to identify and conduct innovative wood and fiber utilization research that contributes to conservation and productivity of the forest resource, thereby sustaining forests, the economy, and quality of life. ... ..more »

- FPL Research Emphasis Areas -
Advanced Composites

As an integral part of the FPL mission, we improve the long-term sustainability of our Nation's forests by creating valuable composite products from biobased materials ... ..more »


Advanced Structures

The FPL has been in the forefront of wood-frame housing research since 1910 and has long been recognized as a world leader in such housing-related areas as engineered wood ... ..more »


Forest Biorefinery

We all know the compelling reasons that the United States needs to reduce its dependence on fossil fuels. Historically, the greatest increases in energy demand have been for transportation fuels ... ..more »


Nanotechnology

A leader in wood products research for over a century, the FPL is positioning itself to become the lead Federal research facility for the application of nanotechnology in forest products ... more »


Woody Biomass Utilization

Forests in the United States contain a substantial amount of small-diameter, overstocked, and underutilized material.FPL research projects are exploring the potential of the small-diameter ... ..more »