Banner for LabNotes
From Lab Notes
Contact Information
Forest Products Laboratory
One Gifford Pinchot Drive
Madison, WI 53726-2398
Phone: (608) 231-9200
Fax: (608) 231-9592


You are here: FPL Home  / Information Products & Services  / Publications

Requested Product

Title: Status and trends : profile of structural panels in the United States and Canada

Source: Research Note FPL-RP-636. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 41 pages

Author(s)Spelter, Henry; McKeever, David; Alderman, Matthew

Publication Year: 2006  View PDF »

Category: Research Papers

Abstract: This paper provides an overview of the North American (United States and Canada) structural panel industry, which consists of softwood plywood and oriented strandboard (OSB). The paper describes the evolution of overall capacities, effective capacity utilization, and manufacturing costs. As part of that, it describes changes in industry operating parameters such as wood use and yield, employee productivity, adhesives usage, and energy consumption. The major end-use markets for these commodities and market share trends are described as they evolved over time. Trends in foreign trade are also covered. Softwood plywood capacity peaked in 1989 at around 24 million m3 (27 billion ft2) and has since dropped to 16 million m3 (18 billion ft2). By contrast, OSB capacity has grown almost continuously and reached 23 million m3 (26 billion ft2) in 2006, on its way to about 26 million (29 billion ft2) by 2008. Productivity as measured by output capacity per employee is about four times higher in an OSB plant than in a plywood mill. Since its inception, OSB product recovery (yield) has also improved by about 15%. These are two major reasons why OSB manufacturing costs are about 25% lower than those for plywood. Given OSB's higher profitability, most of the investment in the sector has been directed into that branch. The cyclical nature of structural panel demand combined with the tug and pull between plywood and OSB capacities have led to considerable cyclical volatility in prices and profits. Over the past 20 years, OSB has largely taken over the sheathing portion of the market for structural panels. Overall, the construction of new buildings and their upkeep and improvement are the largest market for structural panels in the United States. In 2003, about 23.3 million m3 (26.3 billion ft2) of structural panels were used for sheathing and exterior siding in these markets. The use of plywood for sheathing in walls is now rare, somewhat higher in roofs, and highest in flooring. To adapt to the competition, plywood manufacturing has evolved toward more industrial uses and higher grades of panels where its appearance and properties give it an edge that offsets its higher costs. Based on analysis of existing market shares of other materials, it is theoretically possible that structural panel consumption could be increased by about 40% over current levels. This would have represented an additional 9.5 million m3 (10.7 billion ft2) of structural panel consumption in 2003. Imports are an increasing part of supply, with Brazil, Chile, and Canada supplying growing amounts of plywood while Brazil and Europe augment major import flows of OSB from Canada.

Keywords: Structural panel industry capacity; oriented strandboard; plywood; employment; concentration ratios; resin use; wood use; historical evolution; end-use demand; panels; plywood industry

File size: 3 kb(s)

This publication is also viewable on Treesearch:  view
RITS Product ID: 22733
Current FPL Scientists associated with this product (listed alphabetically)
McKeever, David B.
Research Forester
Spelter, Henry N.
Economist (Volunteer)

Additional items that might interest you
View the video celebrating FPL's 100 years of public service in 2010, from the producers of the Greatest Good....view

Research Highlights from FPL....view

Termite Eradication: A search for the Holy Grail.... view

Moisture Management in Residential Construction Series videos...view

Wood Floor Systems in Residential Construction Series videos....view
- FPL's Mission and Strategic Plan -

FPL's mission is to identify and conduct innovative wood and fiber utilization research that contributes to conservation and productivity of the forest resource, thereby sustaining forests, the economy, and quality of life. ... ..more »

- FPL Research Emphasis Areas -
Advanced Composites

As an integral part of the FPL mission, we improve the long-term sustainability of our Nation's forests by creating valuable composite products from biobased materials ... ..more »

Advanced Structures

The FPL has been in the forefront of wood-frame housing research since 1910 and has long been recognized as a world leader in such housing-related areas as engineered wood ... ..more »

Forest Biorefinery

We all know the compelling reasons that the United States needs to reduce its dependence on fossil fuels. Historically, the greatest increases in energy demand have been for transportation fuels ... ..more »


A leader in wood products research for over a century, the FPL is positioning itself to become the lead Federal research facility for the application of nanotechnology in forest products ... more »

Woody Biomass Utilization

Forests in the United States contain a substantial amount of small-diameter, overstocked, and underutilized material.FPL research projects are exploring the potential of the small-diameter ... ..more »